Trilithic

SW-IP Network Contact Closure Switch

  • Home
  • >SW-IP Network Contact Closure Switch

SW-IP Network Contact Closure Switch

SW-IP Network Contact Closure Switch | EAS Equpment by Trilithic, Inc:  leader in analog and digital emergency alert equipment

  • Remote Ethernet Contact Closure Switch
  • Works with OM 1000 in Cable Hubs
  • Standalone device works with EASyPLUS
  • Simple configuration using EASyPLUS software
  • Specific IP address for FIPS-based message routing

The Trilithic SW-IP™ is a device that can be used as a remote contact closure that uses an IP message to activate. When used in conjunction with the EASy series encoder/decoders, the SW-IP can be used for remote switching applications including activation of set-top controller servers or other remote devices. Simply connect the SW-IP to the device that needs to be activated and the mangement network. Program the EASy series encoder/decoder to send IP-based messages to the SW-IP to activate the appropriate device.


While many IP-based switching systems require transmitters and receivers, Trilithic has implemented the control of the devices within the operating firmware of the EASy series encoder/decoder. This not only provides ease of use, it also reduces the number of IP addresses required to implement the system and reduces the cost to deploy. The Trilithic configuration software contains the set up for the messages and the appropriate devices that are addressed and triggered when required.

The firmware provides for location code routing of EAS messages to the associated SW-IP devices.

The SW-IP contains eight relay contacts that can be addressed by the EASyPLUS. These contacts are normally open, but change states during EAS operations.

Warranty

EAS Warranty & Return Service

Trilithic’s warranty policy for Emergency Alert Systems (EAS) Equipment extends for two (2) years from the date of shipment, If covers mistakes or deficiencies in materials and workmanship.

Exclusions from coverage are for any of the following events occurring after the product has

  • Defects or damage resulting from improper operation, storage, misuse or abuse, accident or neglect
  • Contact with liquid or extreme humidity, sand or any comparable substance, or extreme heat
  • Use of the product for any use other than those prescribed in the Trilithic operating manual for EAS equipment
  • Damage resulting from service or modifications performed by a person or firm other than Trilithic, In. or those authorized by Trilithic, Inc. to perform such service on EAS equipment, including, but not by way of limitation, any such damage resulting from installation, testing or other adjustments to hardware or software, and damage resulting from the use of accessories or peripherals not authorized by Trilithic, Inc. for use in and with its EAS equipment.

In The Event of Product Failure

If the EAS product is diagnosed as having failed for reasons other than the exclusions listed above, please call 888-895-7629 and request an RMA (Return Merchandise Authorization) number.

All returned merchandise must have the symptom clearly identified in writing, signed by the authorized representative of the sender and attached to the failed product. All returned merchandise must bear the RMA Number clearly marked in large numerals on the outside of the shipping carton.

All such failed products must be shipped to: Trilithic, Inc. 9710 Park Davis Drive, Indianapolis, IN 46235

EAS products returned without an RMA number clearly marked are subject to a twenty percent (20%) processing fee.

Extended Hardware Warranty

Trilithic, Inc. offers an optional EAS warranty period extension of two (2) years on materials and five (5) years on workmanship from the expiration of the original warranty period. This option must be exercised at the time of the original product purchase.

Think Ahead.
Copyright © 2010 Trilithic, Inc. All Rights Reserved
Execution time: 0.18 seconds
Close

Translate Page

  • To translate page from English to another language, select a language from the drop-down list.
  • To return the page to English, click the Show Original button in the Google Translate bar at the top of the page.
  • To close Google Translate, click the X in the Google Translate bar at the top of the page. This also changes the page back to English.
  • To close this dialogue, click the Close button.
Notice: Translations are approximate.
Close

Session Alert

Notice: Your session is about to expire. If you would like to continue, please click the Continue button. Otherwise you will be logged out and must log back in to return to the current page.

Sign In

My email address is *
* You may also enter your Trilithic screen name.